CAN-AM SPYDER ROADSTER Air-Ride Suspension System $695.00
CAN-AM SPYDER Press Release
CAN-AM SPYDER and BRP ROADSTER - AIRWAVE Air-Ride Suspension Kit
ATTENTION: BRP SPYDER Owner’s. You can now ride in comfort and control with an air-ride rear suspension kit. Our company TeamFAST.COM, is widely recognized as a leading innovator in suspension technology in the recreation vehicle industry. Our kit seriously improves the SPYDER’s ride qualities while adding a wide range of load flexibility.
As an owner you’ve likely discovered that the Spyder’s ride is reasonable for shorter jaunts but when taken out on longer trips it’s clear the stock rear suspension has limitations. If your riding situation frequently changes between solo and with passenger, at some point you’ve likely settled for the stiffer double rider settings. That’s because it’s just too much work to make the correct preload adjustment for solo riding comfort.
With the stock system, when riders make a change in occupants or adds significant gear, they are left with two choices: Either get the floorjack out and perform the time consuming spring preload adjustment or as mentioned just accept riding around with the stiffer two up settings. With our AIRWAVE Air-Ride suspension kit, a rider simply adjusts the air systems preload through air pressure. With the touch of a finger the rider can change the air pressure setting either up or down. The system can be matched to every rider combination from the lightest to the heaviest single or double rider / gear combo.
Most people can buy into the thought that more comfort can be obtained riding on a column of air than on a wound up rod of spring steel. Through the systems inherant air isolation capabilities, the pneumatic system swallows up the big stuff while quietly filtering out practically all of the small through medium sized bumps and road surface irregularities. TeamFAST with the help of Hal and Korey Cronquist of Team CC in Alaska, (BRP’S 2008 National Dealer of the Year) and Legend Engineering have developed a capable system that is straight forward, air tight and easy to install.
Employing an onboard air compressor controlled via an effective multi-function ON-OFF / Pressure / Bleed air switch, the SPYDER’s rear airspring pressure can be easily matched to the loads of the rider(s) and gear. With the onboard air compressor, an easy flip of the remote air switch lets riders adjust / optimize the rear airpring’s pressure, maximizing the SPYDER’s comfort potential and control when riding with or without passenger. This eliminates the need to jack up the SPYDER and crawl around underneath the frame while changing the rear spring’s preload.
Hal and Korey have logged over 15,000 miles on a SPYDER with our AIRWAVE Kit and have many kitted customers on the road througout Alaska. One trip alone was 11,200 miles traveling from Washington state down through California, over to Texas, on to North Carolina and then to Minnesota and then back up to Alaska.
This kit, like all TeamFAST’s suspension products, far surpasses the performance of the stock set-up for ride quality, control and ease of adjustment. Please feel free to contact Brian our product manager or one of our sales reps about the benefits and ease of installing this game changing suspension package!
**CALL NOW TO PLACE YOUR ORDER**
TeamFAST.com PHONE: (218) 744-2101 FAX: (218)744-5872 Website: www.teamfast.com E-mail: rider@teamfast.com
03-26-2010
Comments
will this help reduce the vibration in the foot pegs ?
Write a comment
* = required field